Smeg SI3950B Manuel de service télécharger pdf (Page 14)

Instructions for the user

5.11 Secondary menu (Automatic control lock - Showroom - ECO-logic)

The hob is equipped with a secondary menu for activating or deactivating some parameters:

1 Automatic control lock (not fitted on the 2 cooking zone model): on activating this mode, one

minute after the last operation by the user, the controls will automatically be locked (see 5.9 Control

lock).

2 Showroom: on activating this mode, the appliance deactivates all heating elements, while keeping

the control panel active (useful for demonstration purposes in store). To use the hob normally, set this

mode to “n”.

When Show room mode is activated, “SH” flashes on the display every 5 minutes.

3 ECO-logic (on some models only): on activating this mode, the hob electronics will automatically

adjust the power levels to stay within the set maximum power absorbed: 2; 3 or 4 kW. To use the hob

at maximum power, set this mode to “n”.

On 2 cooking zone models maximum power consumption can be limited to 2 kW.

5.11.1Changing the settings in the secondary menu

With all cooking zones off keep keys and pressed for at least 5 seconds.

The display of the first cooking zone will show the number of the setting currently being modified (1:

automatic control lock, 2: showroom, 3: ECO-logic) with its setting at the side ( : active ; :

inactive). For example, indicates that the automatic control lock is inactive.

Use keys and to change the setting to “ ” or to “ ”; if changing the ECO-logic parameter

the following may be selected (2 kW), (3 kW), (4 kW) and (maximum power

absorbed). To advance and change the subsequent settings, press key .

In the version fitted with two hot plates, you can access the secondary menu pressing keys and

at the same time. To advance and change the subsequent settings, press key .

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Smeg SI3950B Manuel de service Page 14