Smeg AP320X Manuel d'utilisateur télécharger pdf (Page 6)

Instructions for the installer

2.2 Installing the oven

The oven is designed for installation into any piece of furniture as long as

it is heat-resistant. Proceed according to the dimensions shown in

Figures 1, 2 and 3. For installing under a work top, follow the dimensions

given in Figure 3. For installing under a work top beneath a hob with

controls connected to the oven, ensure a minimum clearance from any

side walls of at least 110 mm as shown in Figure 1.

For installing in a column, follow the dimensions given in Figure 2

allowing for a clearance of 80 to 90 mm at the top and sides of the

column. Tighten the four screws (ref.A) inside the frame to secure (Fig.

1).

For installing beneath a separate hob, allow for a rear and bottom

clearance as shown in Figure 1 (ref. B). See relevant instructions for

fitting and securing the hob.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Pas de commentaire

Smeg AP320X Manuel d'utilisateur Page 6