Smeg SCB80MFX5 Manuel d'instructions télécharger pdf (Page 8)

Instruction for the installer

3.4 Adjustment of the oven burner (only for gas oven models)

To adjust the oven burners follow the procedure described below from

inside the oven:

• Open the oven door;

• Remove the oven dish and shelf.

• Lift up the oven floor and remove.

3.4.1 Replacement of the oven burner nozzle

• Loosen the fixing screws A on the oven burner.

• Push the burner B towards the right to get to the

nozzle.

• Use a 13 socket wrench to change the nozzle, fitting

the one for the type of gas to be used (see point “3.2

Table of burner and nozzle characteristics”).

3.4.2 Regulation of the primary air on the oven burner

• Loosen the register screws “A” on the air regulation coupling.

• Turn the register coupling “B” to the position corresponding to the type of

gas to be used according to the table below.

• Tighten the register screws and mount the seals.

• Once the operation is completed reassemble the burner correctly.

NATURAL GAS

G30/G31 (GPL)

90cm Oven

G30/G31 (GPL)

60cm Oven

X =

5 mm 15 mm 10 mm

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

Smeg SCB80MFX5 Manuel d'instructions Page 8