Smeg SNZ61MFA1 Manuel d'instructions télécharger pdf (Page 21)

Instructions for the installer

17.FINAL OPERATIONS

16.2 Burner and nozzle characteristics table

Burner LPG (PROPANE)–2.75 KPA

NOMINAL GAS

CONSUMPTION

(MJ/H)

TURN-DOWN GAS

CONSUMPTION

(MJ/H)

INJECTOR

(MM)

Auxiliary 3.9 1.5 0.54

Semi rapid 6.3 1.5 0.68

WOK 12.8 5.4 1.00

Burner NG –1.0 KPA

NOMINAL GAS

CONSUMPTION

(MJ/H)

TURN-DOWN GAS

CONSUMPTION

(MJ/H)

INJECTOR

(MM)

Auxiliary 3.9 1.5 0.90

Semi rapid 6.5 1.5 1.20

WOK 15.0 5.4 1.75

16.3 Arrangement of the burners on the hob

BURNERS

1 Auxiliary

2Semi rapid

3WOK

ø min e max (in cm.)

12 - 14

16 - 24

18 - 26

After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the grids.

Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to the

appliance with the one corresponding to the new gas. This label is in the packet together with the

nozzles.

17.1 Regulation of the hob burner minimum level for natural gas

Light the burner and turn it to the minimum position . Extract the gas tap knob

and turn the adjustment screw at the side of the tap rod until the correct minimum

flame is achieved.

Replace the knob and check burner flame stability: (rapidly turning the knob from

maximum to minimum position, the flame should not go out). Repeat the

operation on all the gas taps.

For models with valves, keep the knob at minimum level for about 1 minute to keep the flame lit and to

activate the safety device.

1 2 ... 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Smeg SNZ61MFA1 Manuel d'instructions Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de cuisine et de ménage Smeg SNZ61MFA1