Smeg C36GGXU Guide d'installation télécharger pdf (Page 13)

Instructions for the installer

Always use pipe-joint compound made for use with NATURAL

GAS and L.P. GAS between pressure regulator D and NPT

adaptor C and between pressure regulator D and pipe E. If a

flexible metal conductor is used, make sure that the tubing is not

kinked.

Use only pipes (E) conforming to standard regulations in force,

inserting gasket B (supplied) between fitting A adaptor C.

Always apply a suitable sealing substance (such as Teflon tape)

between pressure regulator D and adaptor C and between

pressure regulator D and pipe E.

WARNING: The tightening torque of adaptor (C ) must not be greater than 36 ozf - 10 Nm.

The supply line must be fitted with an approved shut-off valve.

This valve should be located in the same room as the cooktop

and should be in a location where it can be easily opened and

closed.

Do not block access to the shut-off valve. The valve is necessary

for turning the gas to the appliance on or off.

1 2 ... 8 9 10 11 12 13 14

Pas de commentaire

Smeg C36GGXU Guide d'installation Page 13