Smeg CS15-5 Manuel d'installation télécharger pdf (Page 13)

User Instructions

7.3.3 Using the rotisserie in cooking ranges with a large oven

Insert the support framework on the second

guide up from the bottom in such a way that

the spit housing is outside the oven. Position

the spit as shown in figure (1) and push the

framework inside the oven until the end of the

spit meets the corresponding hole for the

rotisserie motor. Now push the rotisserie spit to

the left (see position shown in figure 2). To

activate this function, set the switch to position

(

These procedures must be carried out

when the oven is switched off and cold.

At the end of the cooking process, pull the spit

out of hole (3) using the appropriate tool and

take out the framework (4) so that you can

remove the rotisserie spit from the oven.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Smeg CS15-5 Manuel d'installation Page 13