Smeg SFP125S-1 Manuel d'utilisateur télécharger pdf (Page 35)

Cleaning and maintenance

79

EN

Vapor Clean setting

1. Select the symbol using the function

knob.

2. The duration and temperature of the

cleaning cycle will appear on the

display.

3. Press the temperature knob to start the

cycle.

4. A buzzer will indicate the end of the

Vapor Clean cycle.

End of the Vapor Clean cycle

1. Open the door and wipe away the less

stubborn dirt with a microfibre cloth.

2. Use an anti-scratch sponge with brass

filaments on tougher encrustations.

3. In case of grease residues use specific

oven cleaning products.

4. Remove the water left inside the oven.

For improved hygiene and to avoid food

being affected by any unpleasant odours,

we recommend that the oven is dried using

a fan assisted function at 160°C for

approximately 10 minutes.

If the internal temperature is

greater than that required for the

Vapor clean function, the cycle will

be stopped immediately and

STOP will appear on the display.

Let the appliance cool down

before activating the assisted

cleaning cycle.

The temperature and time

parameters cannot be modified by

the user.

We recommend wearing rubber

gloves for these operations.

For easier manual cleaning of the

parts difficult to reach, we

recommend removing the door.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Commentaires sur ces manuels

Pas de commentaire