Smeg WIL61BVM Manuel d'instructions télécharger pdf (Page 21)

Instruction for the user

9 DIGITAL TIMER (CERTAIN MODELS ONLY)

This component allows an on-off beeper to be set to indicate the end of the cooking time. It is

therefore just a timer, with no programming functions.

LIST OF FUNCTIONS

TIME-SETTING BUTTON

VALUE DECREASE BUTTON

VALUE INCREASE BUTTON

9.1.1 Setting the time

When the oven is used for the first time, or after a power blackout, the display flashes on and off at

regular intervals showing

. Press the key and use the or keys to set the current

time.

9.1.2 Setting the timer

To set the timer, press the

key and keep it pressed until the required number of minutes is shown.

When the

key is released, after 5 seconds the countdown will start; once this finishes, an acoustic

device will sound.

During the countdown the display will show the

symbol; pressing the key displays the current

time for 5 seconds.

9.1.3 Deactivating the acoustic device

The acoustic device stops sounding automatically after seven minutes. It can be deactivated in

manual mode by pressing the

key.

9.1.4 Adjusting the volume of the acoustic device

The volume can be adjusted (3 settings) while it is in operation by pressing the key.

9.1.5 Modifying the data set

The timer data set can be modified at any moment by pressing the

or keys.

10 ANALOGUE CLOCK (ONLY ON EQUIPPED MODELS)

The mechanical timer is set by turning the knob clockwise.

The timer can be set from 0 to 55 minutes. At the end of the cooking time, an

alarm signal will be heard: to stop the alarm turn the external part of the knob to

position

The clock is set by pulling the knob and turning it clockwise.

1 2 ... 16 17 18 19 20 21 22 23 24

Pas de commentaire

Smeg WIL61BVM Manuel d'instructions Page 21