Smeg SE65CX Manuel d'utilisateur télécharger pdf (Page 8)

Instructions for the installer

9.4 POSITIONING OF THE HOB

The following operation requires building and/or carpentry work so must be carried out by a competent

tradesman.

Installation can be carried out on various materials such as masonry, metal, solid wood or plastic

laminated wood as long as they are heat resistant (T 90°C).

Create an opening with the dimensions shown in the figure in

the top surface of the counter, keeping a minimum distance of

50 mm from the rear border.

This appliance can be mounted against walls higher than the

work surface on condition that a certain distance “X” be kept

between the appliance and the wall as shown in the figure so

as to avoid damage from overheating.

Make sure there is a minimum of 750 mm between the hob and

any shelf that may be installed directly above them.

9.5 Mounting

Before mounting the device to the unit, lay the provided adhesive sponge onto

the glass surface to separate it from the unit.

After fixing the provided adhesive sponge (B) to the glass, mount the device to

the unit with the mounting brackets (A) provided with the device itself, as

shown in the figure.

1 2 3 4 5 6 7 8

Pas de commentaire

Smeg SE65CX Manuel d'utilisateur Page 8