Smeg FC310AL Manuel d'utilisateur télécharger pdf (Page 11)

11

UK

Starting up

Connect the appliance to the socket outlet.

Press the on/off switch .

The actual temperature in the freezer

section is shown on the display.

To display the actual temperature in the

refrigerator section, press the refrigerator

button once. After 1 minute, the display

returns automatically to the temperature

in the freezer section. Alternatively, press

the freezer button once to return to the

temperature in the freezer section.

Temperature setting

The temperature in the refrigerator section

can be set from +2°C to +9°C by pressing

the refrigerator button . The display

shows the temperature setting. Press the

button until the desired temperature setting

is displayed.

The temperature in the freezer section can

be set from -24°C to -16°C by pressing

the freezer button . The display shows

the temperature setting. Press the button

until the desired temperature setting is

displayed.

Note that the temperature in the freezer

section should be -18°C or lower in order to

prevent microorganisms from multiplying.

A temperature setting of 4°C is

recommended for the refrigerator section.

Super Freeze

Before freezing large quantities of fresh

food, it is recommended that the Super

Freeze function be activated.

To do so, press the Super Freeze button

.

The control lamp lights yellow to indicate

that the Super Freeze function is switched

on.

Super Freeze is used to freeze large

quantities of fresh items and must be

activated up to 24 hours before placing

such items in the freezer.

When Super Freeze is switched on, the

compressor runs constantly and the

temperature in the freezer falls below the

normal setting. This temperature reduction

ensures that non-frozen items do not affect

the temperature and thus the quality of

frozen items already stored in the freezer.

Super Freeze is switched off automatically

after 24 hours.

Door-open alarm (fridge)

If the door has been left open for longer

than two minutes, an acoustic alarm is

activated and the control lamp ﬂashes red.

Both these alarms are reset when the door

is closed. On pressing the alarm button ,

only the acoustic alarm is switched off.

High-temperature alarm

Visual and acoustic alarms are activated if

the freezer temperature has been higher

than -10°C for more than 90 minutes. If

the temperature drops again, the visual

and acoustic alarms remain active and

the display continues to show the highest

temperature recorded in the freezer. To

reset the alarms, press the alarm button .

This switches off the alarms and returns

the display to the actual temperature in the

freezer.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire