Smeg FR238APL Manuel d'utilisateur télécharger pdf (Page 9)

ELECTRICAL CONNECTION

For Great Britain only

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS 1362 type and proceed as

follows:

Remove the fuse cover (

) and fuse (

Fit replacement 13A fuse into fuse cover.

Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if

the fuse cover is lost the plug must not be used until a

correct replacement is fitted.

Correct replacement are identified by the colour insert or

the colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local

electrical store.

Socket outlet / plug

If the fitted plug is not suitable for your socket outlet, please

contact Whirlpool Service on 0870 600 8989 for further

instruction. Please do not attempt to change plug yourself.

This procedure needs to be carried out by a qualified

Whirlpool technician in compliance with the manufactures

instructions and current standard safety regulations.

For the Republic of Ireland only

The information given in respect of Great Britain will

frequently apply, but a third type of plug and socket is also

used, the

2-pin, side earth type. In this case, the wire which is

coloured GREEN AND YELLOW must be connected to the

EARTH contact, and the two wires to the two pins,

irrespective of colour. The supply to the socket must be

fitted with a 16 amp fuse.

63633043GB.fm Page 20 Saturday, March 5, 2005 3:25 PM

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Smeg FR238APL Manuel d'utilisateur Page 9