Smeg DRY50V Manuel d'installation télécharger pdf (Page 11)

Instructions for the user

6. EXTRAORDINARY MAINTENANCE

The sterilizer may require extraordinary maintenance or replacement of

parts subject to wear such as seals, bulbs, and so on. The following

instructions describe how to carry out these minor maintenance

operations.

Before any intervention, disconnect the power supply of the

sterilizer.

6.1 Removing the door

Hinges with mobile connecting plates

Catch the door at the two sides with both hands in proximity to hinges C

and lift up the small levers D. Lift the door upwards at an angle of about 45°

and slide out. To remount, insert hinges C into the appropriate grooves,

allow the door to rest downwards and release the small levers D.

6.2 Sterilizer door seal

To permit thorough cleaning of the sterilizer, the seal may

be removed. Before removing the seal, take off the door

as described above. Once the door has been taken off, lift

the tabs at the corners as shown in the figure.

1 2 ... 6 7 8 9 10 11

Pas de commentaire

Smeg DRY50V Manuel d'installation Page 11