Smeg STL 60 Manuel d'utilisateur télécharger pdf (Page 19)

GB 17

ELECTRICAL CONNECTION

Do not use extension leads or multi sockets.

Electrical connections must be made in accordance

with local regulations.

1) Warning - this appliance must be earthed

This appliance is normally supplied with a mains lead having

a plug fitted in the factory which has been checked for

correct earth continuity.

If the fitted plug is not suitable for your socket outlet, or if

the machine’s mains lead is not fitted with a plug, you

should fit a suitable new, good quality plug by following the

instructions in (2) below.

Any unsuitable plug should be cut off and disposed of in

order to avoid a possible shock hazard should it be

inserted into a socket.

2) CONNECTION TO A REWIRABLE PLUG - to be

carried out only by a qualified electrician

The wires in the mains lead are coloured in accordance

with the following code:

BLUE - “NEUTRAL” (“N”)

BROWN - “LIVE” (“L”)

GREEN AND YELLOW - “EARTH” (“E”)

Valid Only For Great Britain And Ireland

To fit a new plug, proceed as follows:

2.1 Polarized Plugs (e.g. 3 pin, 13 amp plug

conforming to BS 1363A)

The GREEN AND YELLOW wire must be connected

to the terminal in the plug which is marked with the

letter “E” or by the Earth symbol or coloured

green and yellow.

The BLUE wire must be connected to the terminal

which is marked with the letter “N” or coloured blue.

The BROWN wire must be connected to the terminal

which is marked with the letter “L” or coloured

brown.

2.2

Non-polarized plugs (e.g. 2 pin with side earth

contact). The wire which is coloured GREEN AND

YELLOW must be connected to the earth contact.

The other two wires should be connected to the two

pins, irrespective of colour.

Fuse replacement

If the mains lead of this appliance is fitted with a

BS 1363A 13amp fused plug, replace the fuse only with an

A.S.T.A. approved type conforming to BS 1362 and

proceed as follows:

Remove the fuse cover (

) and fuse (

Fit the replacement 13 A fuse into the fuse cover.

Refit both into plug.

IFU_Alpha_Sc1-mech_GB.fm Page 17 Wednesday, March 30, 2005 6:52 PM

Black process 45.0° 100.0 LPI

1 2 ... 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire

Smeg STL 60 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Smeg STL 60