Smeg TLS8 Manuel d'utilisateur télécharger pdf (Page 16)

GB 16

INSTALLATION

Removal of transport bracket

The washing machine is fitted with a transport bracket to

avoid any possible damage during transport.

IMPORTANT: Before using the washing machine, the

transport bracket at the back MUST be removed.

1. Unscrew the two screws “A” and the four screws “B”

with a flat screwdriver or a No. 8 hex nut box spanner.

2. Remove the transport bracket.

3. Replace the four outer screws “B” on the machine and

tighten them.

4. Clip the two seals “C” supplied into the openings “D” of

the washing machine.

Note: do not forget to replace and tighten the four

outer screws.

IFU-TL HR GB.fm Page 16 Thursday, June 7, 2007 2:23 PM

1 2 ... 11 12 13 14 15 16 17 18 19

Pas de commentaire

Smeg TLS8 Manuel d'utilisateur Page 16