Smeg WHT714EUK Manuel d'utilisateur télécharger pdf (Page 19)

19 / EN

Washing Machine / User’s Manual

7.7 Auxiliary function selection

Select the desired auxiliary functions before starting the programme.

Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will

illuminate.

Indicator lights of the auxiliary functions that are not allowed to be selected with the current programme will flash and an

audio warning is given.

Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme

after the washing cycle starts. If the wash cycle has reached a point where no auxiliary function can be

selected, an audio warning will be given and the related auxiliary function's light will flash.

Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before

starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain

active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be

canceled and Quick Wash will remain active.

An auxiliary function that is not compatible with the programme cannot be selected. (See, “Programme and consumption

table")

Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The

frame of the auxiliary function will not be illuminated, only inner area will be illuminated.

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,

detergent and time.

• Quick

This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the

number of rinsing steps for lightly soiled laundry.

When you select this function, load your machine with half of the maximum laundry specified in the programme table.

• Extra Rinse

This function enables the machine to make another rinsing in addition to the one already made after the main

wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent

remnants on the laundry can be reduced.

• Rinse Hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse

hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled

when there is no water in the machine. Press Start / Pause button after this process if you want to drain the

water without spinning your laundry. Programme will resume and complete after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.

The programme resumes. Water is drained, laundry is spun and the programme is completed.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Pas de commentaire

Smeg WHT714EUK Manuel d'utilisateur Page 19