Smeg SR60GHU3 Manuel d'instructions télécharger pdf (Page 6)

Instructions for the user

3.1.1 Power failure

In case of a prolonged power outage you can manually light the surface burners.

Hold a lit match near a burner and turn the control knob to the minimum flame symbol . After the

burner lights, turn the knob to the desired setting.

3.2 Practical advice on using the burners

NOTE: Do not obstruct the flow of combustion and ventilation around the edges of the pan stand.

To achieve a better performance of the burners and and a lower gas consumption, flat

bottomed, levelled cookware with lids should be used, and they should also be

proportioned to the burners (see paragraph “3.3 Diameter of cookware”).

To avoid overcooking or damaging the surface top while cooking, all cookware or

griddles must be positioned within the cooktop perimeter and at a minimum distance of

3-4 cm / 1 ½” from the knobs.

Check burner flames occasionally for proper size and shape. A good flame is blue in

color, not yellow. Keep the burner ports area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

NOTE: Before turning a control knob, place filled cookware on the pan stand. Do not operate a burner

using empty cookware or without cookware on the pan stand.

Do not leave empty cookware on a hot surface cooking area, element or surface burner.

3.3 Diameter of cookware

BURNERS Ø min. and max. (cm) Ø min. - max. (inch)

1 Auxiliary 7 - 18

2”

- 7”

2 Semi-rapid 10 - 24

4” - 9 “

3 Rapid 18 - 24

7” - 9 “

4 Ultra rapid 20 - 28

7”

- 11”

1 2 3 4 5 6 7 8 9

Pas de commentaire

Smeg SR60GHU3 Manuel d'instructions Page 6