Smeg SA683X-1 Manuel d'instructions télécharger pdf (Page 33)

FAULT DESCRIPTION

Turbine flow-regulator malfunction

(for the relevant models only)

The appliance is not able to "measure" the amount of water loaded

accurately. Interrupt the program and switch off the dishwasher. Switch

the dishwasher back on, program it again and start the washing cycle. If

the problem persists, contact the after-sales service.

Alternate washing system malfunction

Interrupt the program and switch off the dishwasher. Switch the

dishwasher back on, program it again and start the washing cycle. If the

problem persists, contact the after-sales service.

Water intake system malfunction

Contact the after-sales service.

• The

alarms provoke the “forcing” to end

cycle of the running program.

• The

alarms interrupts the running program once the cause is

resolved, it will bring bach the execution of the program.

• The alarm

is visualized at the end of the cycle that comes,

however, brought to the end since the operation of the dishwasher is

not harmed.

To “reset” an alarm is necessary:

• Open and close the door, or turn off and on the machine. At this

point is possible to program the dishwasher again.

If the fault persists, call the authorised Technical Service Centre.

TECHNICAL DATA

Width

597

599 mm

Depth measured flush with the

outer edge of the control panel

Free standing: 600 mm

Semi-integrated: 570 mm

Height

Free standing from 850 mm to 870 mm

Semi-integrated from 820 mm to 870 mm

Capacity

14 Standard place settings

Water supply pressure

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

Electrical characteristics

See rating plate

User instructions

1 2 ... 28 29 30 31 32 33 34

Commentaires sur ces manuels

Pas de commentaire

Smeg SA683X-1 Manuel d'instructions Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Smeg SA683X-1