Smeg ALFA135BE Manuel d'instructions télécharger pdf (Page 11)

Instructions for the User

4.9 Rapid cooling

The oven has a special function which allows its interior to be cooled

quickly. To activate this function, turn the function selector to "0", open the

door and press the START key for at least 2 seconds. The fans inside the

oven will come into operation with the heating elements off. To stop the

function, press the STOP key.

4.10 Key to the oven's beep sounds

All the beep sounds the oven emits are different from each other, in order

to allow the user to identify exactly what the oven is doing.

Parameter setting/modification menu = 1 single beep

End of preheating and pause before start of cooking = 5 beeps followed by

a pause of 2 seconds.

Start of cooking = 2 single beeps.

Door open during preheating and cooking = continuous beep.

End of cooking = 3 beeps followed by pause of 4 seconds.

4.11 Possible error messages on the display

4.11.1 Err1

This message appears whenever the software detects that the sensor

connector is not properly connected to the electronic circuit board or has

short-circuited.

This error resets automatically when the oven’s power supply is switched

off. If the error persists, call the After-Sales Service.

4.12 Technical notes

If the power supply to the appliance fails at any time, always return the

knob to the 0 setting before running any programs.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Smeg ALFA135BE Manuel d'instructions Page 11