Smeg A31G7IXIA Manuel d'utilisateur télécharger pdf (Page 21)

Instructions for the user

7. CLEANING AND MAINTENANCE

NEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE.

Before performing any operations requiring access to powered

parts, switch off the power supply to the appliance.

7.1 Cleaning stainless steel

To keep stainless steel in good condition it should be cleaned regularly

after use. Let it cool first.

7.1.1 Ordinary daily cleaning

To clean and preserve the stainless steel surfaces, use only specific

products that do not contain abrasives or chlorine-based acids.

How to use: pour the product onto a damp cloth and wipe the surface,

rinse thoroughly and dry with a soft cloth or deerskin.

7.1.2 Food stains or residues

Do not use metallic sponges or sharp scrapers as they will

damage the surface. Use ordinary non-abrasive products for

steel, with the aid of wooden or plastic utensils if necessary.

Rinse thoroughly and dry with a soft cloth or chamois leather.

7.2 Cleaning the gas components

For easier cleaning the pan stands, burner caps,

flame spreader crowns and burners can all be

removed; wash them with warm water and a non-

abrasive detergent making sure to remove any

encrustation, then wait until they are perfectly dry.

Replace the burner caps on their corresponding

crowns, making sure that the slots A are centred

with the burner pins B.

For correct operation, the igniters and thermocouples must

always be perfectly clean. Check them frequently and

clean them with a damp cloth if necessary. Remove any dry

residues with a wooden toothpick or a needle.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Smeg A31G7IXIA Manuel d'utilisateur Page 21