Smeg S3F0922P Manuel d'utilisateur télécharger pdf (Page 12)

3. If necessary, replace the defective door

gaskets. Contact the Authorised

Service Centre.

INSTALLATION

WARNING! Refer to Safety

chapters.

Location

Refer to the assembly

instructions for the installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

Positioning

Install the appliance in a dry, well ventilated

indoors where the ambient temperature

corresponds to the climate class indicated

on the rating plate of the appliance.

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation

can only be guaranteed within

the specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer service

or to the nearest Authorised

Service Centre.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

5 cm

min.

200 cm

2

min.

200 cm

2

Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your domestic

power supply.

• The appliance must be earthed. The

power supply cable plug is provided with

a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a qualified

electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the E.E.C.

Directives.

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Commentaires sur ces manuels

Pas de commentaire