Smeg A4BL-8 Manuel de service télécharger pdf (Page 33)

Instructions for the user

9.4 Cleaning the cooking hob parts

9.4.1 Pan stands

Remove the pan stands and clean them with lukewarm water and non-abrasive

detergent, making sure to remove any encrustations. Dry them thoroughly and

return them to the hob.

Continuous contact between the pan stands and the flame can cause

modifications to the enamel over time in those parts exposed to heat. This is a

completely natural phenomenon which has no effect on the operation of this

component.

Do no wash these parts in a dishwasher.

9.4.2 Burner caps and flame-spreader crowns

The burner caps and flame-spreader crowns can be

removed for easier cleaning. Wash them in warm water and

non-abrasive detergent making sure to remove any

encrustation, then wait until they are perfectly dry.

Replace the flame-spreader crowns, making sure that they

are correctly in place with their respective burner caps and

ensuring that the holes A in the flame-spreaders are aligned

with the igniters and thermocouples.

Do no wash these parts in a dishwasher.

9.4.3 Igniters and thermocouples

For correct operation, the igniters and thermocouples must

always be perfectly clean. Check them frequently and clean

them with a damp cloth if necessary. Remove any dry

residues with a wooden toothpick or a needle.

Do not use cleaning products containing chlorine, ammonia or bleach on steel

parts or parts with metallic finishes on the surface (e.g. anodizing, nickel- or

chromium-plating).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Pas de commentaire

Smeg A4BL-8 Manuel de service Page 33