Smeg TR4110IBL Manuel d'utilisateur télécharger pdf (Page 16)

Use

56

Booster function

• Turn the knob clockwise to the P position

for two seconds and then release. The

display shows the symbol . After 5

minutes the booster function will

automatically be disabled and cooking

will continue at power level 9 (on zones

2 and 3 only).

Power control

The hob is fitted with a power control

module that optimises/limits consumption. If

the overall set power level exceeds the

maximum limit permitted, the electronic

circuit board will automatically manage the

power supplied by the cooking zones.

The module tries to maintain the maximum

deliverable power levels. Levels set by the

automatic control will appear on the

display.

The flashing of a power level indicates that

it will be automatically limited to a new level

selected by the power control module.

Control lock

1. With all cooking zones off,

simultaneously turn the two cooking zone

control knobs to the left (position A).

2. Keep them turned until the symbols

appear on the display.

3. Release the knobs.

In order to remove the control lock repeat

the same operations described previously.

The booster function allows you to

activate the cooking zone at

maximum power as long as 5

minutes. It can be used to bring a

large quantity of water to a boil

rapidly or to broil meat.

The booster function has priority

over the heating accelerator

function.

Priority is given to the last zone set.

The control lock is a device that

protects the appliance from

accidental or inappropriate use.

If the knobs have been kept turned

to the A position for more than 30

seconds a fault message appears

on the display.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Commentaires sur ces manuels

Pas de commentaire