Smeg CW400RSD Manuel d'utilisateur télécharger pdf (Page 17)



Confirm the initiation of the program by pressing

While the cycle is running the selected program’s led

indicator will flash;

Once the selected program has finished its led indicator

will stop flashing and will remain on. The

led

indicator starts flashing.

Remove the basket

If the door is opened with the wash cycle running the program stops and resets itself. Once the door has been

closed again press the

button to restart the cycle.

Total drainage at the end of the day (models

equipped with drain pump)

After having removed the overflow from the basin, close

the door and press the

button to select the option.

The

led indicator turns on and the LED indicator

flashes.

Press

for 2 seconds to initiate the emptying of the

basin and the boiler with the door closed. The drain led

indicator

starts flashing.

At the end of the function the machine goes into

standby and the drain led indicator stops flashing and

remains on.

To render the machine operational again it is therefore

necessary to insert the overflow and to push the

button.

Total drainage at the end of the day (models not

equipped with drain pump)

Shut off the machine

, open the door, remove the

overflow and wait until the basin has been drained.

Insert the overflow and close the door again.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Pas de commentaire

Smeg CW400RSD Manuel d'utilisateur Page 17