Smeg DWI409C Manuel d'utilisateur télécharger pdf (Page 27)

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the

simultaneous illumination of several indicator lights, with the following

meanings:

FAULT DESCRIPTION

The dishwasher’s anti-flooding system has been

activated (only for models equipped with the

"TOTAL ACQUASTOP” device).

This alarm is triggered in the event of a water leak in

the dishwasher. In such circumstances the technical

service centre must be called.

The dishwasher fails to heat the water.

Repeat the wash program. If the problem persists,

contact the customer technical service centre.

The temperature monitoring system has failed.

Switch the dishwasher off, switch it back on and

restart the washing program.

If the alarm recurs, call the After Sales Service.

The dishwasher fails to draw water.

Ensure the plumbing connections are in order and

that the water supply tap is open.

The dishwasher fails to drain.

Check that the drain hose is not kinked, the siphon

is not obstructed and the filters are not clogged.

Light off Light on Light flashing

If an alarm occurs the appliance interrupts the program in progress and

signals a fault.

•

In case of

and

, the washing program must be set again to

continue.

•

In case of

and

, simply open and close the door to continue (once

the cause of the fault has been illuminated).

1 2 ... 22 23 24 25 26 27 28

Pas de commentaire

Smeg DWI409C Manuel d'utilisateur Page 27