Smeg ST1146SE Manuel d'instructions télécharger pdf (Page 10)

User instructions

OPTIONS (available in all programs except the soak program)

Options must be chosen before closing the door to start the program,

or at the end of assisted programming, when the DISPLAY (G) offers the

option selection function (button B/C to accept).

If DELAYED START (C) has been set, before the program starts the

user may open the door and set one of the other options, or modify the

DELAYED START.

To select the option press (D); to enable/disable it press (E).

Key (D) Key (E)

Function Enable Disable

EXTRA HYGIENE 1 0

START DELAY 1>12/1>24 0

HALF LOAD upper/lower OFF

DETERGENT 3/1 NORMAL

For an option to be confirmed it needs only to appear on the display.

Then close the door to start the program, or move on to select another

option.

Depending on the model the dishwasher may feature one, some or all

of the options listed below.

All the options are disabled at the end of the program.

DELAYED START (depending on model)

Shown on the DISPLAY (G): "Start delay h 0, 1, .....12/24".

The start of the washing program can be set with a delay from 1 to

12/24 hours. This function allows you to set the dishwasher to work at

your preferred time of day and avoid having several appliances (washing

machine, oven, etc.) in operation simultaneously.

The start delay can only be set in steps of 1 hour. Press key (C) in

repetition until you obtain the delay required, then close the door to start

or select another option.

When the door is closed the dishwasher performs a prewash, after

which the countdown to the starting time begins. The bottom line of the

DISPLAY (G) shows "Starting in X h" or "Starting in Y min" (when less

than 1 hour is left).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Pas de commentaire

Smeg ST1146SE Manuel d'instructions Page 10