Smeg UKUD7108FSEP Manuel d'utilisateur télécharger pdf (Page 12)

Problem Possible cause Solution

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products tem-

perature decrease to room

temperature before storage.

Many food products are stor-

ed at the same time.

Store less food products at

the same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened

often.

Open the door only if neces-

sary.

The FastFreeze function is

switched on.

Refer to "FastFreeze func-

tion".

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead to

the desired result, call the

nearest Authorized Service

Centre.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised

Service Centre.

INSTALLATION

WARNING! Refer to Safety

chapters.

Location

Refer to the assembly

instructions for the installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

Positioning

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

12

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire