Smeg 155620 Manuel d'utilisateur télécharger pdf (Page 23)

155620

23

Failure Possible cause Remedy

The machine does not

work

(display is not

illuminated).

Machine is not powered. Check if:

• plug is in the socket,

• there is power in the socket,

• the fuse is OK.

Water does not enter

the machine.

Filter is not tightly screwed in.

Inlet pipe is not tightly screwed

to the machine or to the water

faucet.

Outlet pipe fell to the ﬂ oor.

Tighten the ﬁ lter properly.

Tighten the inlet pipe.

Afﬁ x the outlet pipe to the drain.

The machine moves

during operation.

The machine is not properly

leveled.

Transport brackets are not

removed.

Level the machine with the adjustable

legs.

Remove transport brackets.

The machine vibrates

during the spin.

Unevenly distributed laundry,

especially with very small

quantities (for ex. only the

bathrobe).

This is normal, the machine will

reduce the RPM if vibrations are

too strong. Wash larger quantity of

laundry.

Excessive foaming

during washing.

Excessive measure of detergent. Use washing powder according to

the instructions by the producer and

according to the water hardness and

soiled laundry.

Use only detergents for machine

washing.

Laundry is not properly

spun.

No failure is reported.

The machine switched on the

UKS* function. Because of bad

laundry balance, the machine has

automatically reduced spin RPM.

The machine operates normally. Wash

large and small pieces of laundry

together.

Greasy wads appear

on the laundry.

Too little detergent (laundry was

very greasy).

Wash the laundry again.

Add more detergent for such soiled

laundry, or use liquid detergent.

Unpleasant smell in

the washing machine

drum.

Remains of fabrics, washing

agent and softener in the ﬁ lter.

Check whether the ﬁ lter is clean.

Laundry is stained

after washing.

You used liquid detergent or

detergent for colored laundry

which does not contain whitener.

You selected inappropriate

program.

Use the detergent containing whitener.

Select the heavily soiled laundry

program, or activate soaking function.

White powdery

residues on the

laundry.

It is not the consequence of bad

rinsing, but because of neo-

phosphate detergents containing

non soluble components

(zeolites) for water softening.

Such substances may be

deposited upon the laundry.

Inappropriately selected program.

• Immediately rinse the laundry once

again.

• Use liquid detergents which do not

contain zeolites.

• Try removing the residues with the

brush.

• Use program for heavily soiled

laundry, or activate soaking function.

Detergent residues in

the dispenser.

Low water ﬂ ow pressure.

Some detergents may stick to the

dispenser rather hard if it is wet.

• Clean the inlet pipe screen.

• Wipe the dispenser prior loading

detergent.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire