Smeg 155620 Manuel d'utilisateur télécharger pdf (Page 5)

155620

In removing the wrapping be careful not to damage the

appliance with a sharp object.

Before connecting the appliance, let it warm up to room

temperature (wait for two hours).

• Our appliances are packed in environmentally friendly

materials which may be recycled, deposited or decomposed

without any threat to the environment.

• To this end all wrappings are marked accordingly.

• Move the pipes.

• Loosen screws A at the rear of the machine (Fig. 1).

• Remove the brackets B (Fig. 1) and slide them into the groove

on the blocking rod (Fig. 2) - the right one should be turned

around.

• Use the brackets to rotate blocking rods for 90° and pull them

out.

• Close the openings with attached plastic pegs.

Save transport brackets for eventual later use.Save the transport

brackets for eventual later use.

Be sure to remove the transport brackets prior ﬁ rst

use, otherwise the appliance may be permanently

damaged. In such cases the warranty conditions are

void.

Fig. 1 Fig. 2

• Put the appliance in horizontal position by turning the

adjustable legs.

The legs are adjustable up to +/- 1 cm.

After the adjustment tighten the nuts ﬁ rmly (A) - towards

the bottom of the machine!

Vibrations, moving of the appliance and loud operation

due to incorrect setting of the adjustable feet shall not

be covered by this warranty.

The appliance should be placed on a surface with

concrete base; the surface should be dry and clean in

order to prevent slipping. The adjustable feet should

also be cleaned before installation.

Package removalPackage removal

Removal of transport

brackets

Removal of transport

brackets

Leveling the applianceLeveling the appliance

Installation and connection

1 2 3 4 5 6 7 8 9 10 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Smeg 155620 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Smeg 155620