Smeg WHT814LUK Manuel d'utilisateur télécharger pdf (Page 23)

23 / EN

Washing Machine / User’s Manual

1888

88:88

Changing the programme selection after programme has started:

The programme change is not allowed when the current programme is running.

You can select the new programme after switching the current programme to pause mode.

The selected program starts anew.

Changing the auxiliary function, speed and temperature

Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See,

"Auxiliary function selection".

You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature

selection".

The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.

7.13 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes

in a running programme.

You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine

again, programme will resume from where it has stopped.

When the child lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if the

buttons are pressed 5 times consecutively.

To activate the Child Lock:

Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as “CL 3-2-1" on the display

is over, "Child Lock Enabled" appears on the display. Release 2nd Auxiliary Function button when this

warning is displayed.

To deactivate the childproof lock:

Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as “CL 3-2-1” on the display

is over, "Child Lock Enabled" disappears from the display.

7.14 Cancelling the programme

The programme is cancelled when the machine is turned off and on again. Press and hold On / Off button for

3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.

If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child

Lock first.

If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading

door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to

Pump+Spin programme and discharge the water in the machine.

7.15 End of programme

End symbol appears on the display when the programme is completed.

If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators

are turned off.

Completed programme steps will be displayed if you press On / Off button.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Smeg WHT814LUK Manuel d'utilisateur Page 23