Smeg WHT814LUK Manuel d'utilisateur télécharger pdf (Page 27)

27 / EN

Washing Machine / User’s Manual

If the product does not have an emergency water drain hose, in order to drain the water:

a. In order to collect the water to flow out of the filter,

place a large vessel in front of the filter.

b. Turn and loosen the pump filter until water starts to

flow (counterclockwise). Fill the flowing water into

the container you have placed in front of the filter.

Always keep a piece of cloth handy to absorb any

spilled water.

c When the water inside the machine is finished, take

out the filter completely by turning it.

4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.

5. Replace the filter.

6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat

the tabs in the lower part into their places first, and then press the upper part to close.

1 2 ... 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Smeg WHT814LUK Manuel d'utilisateur Page 27