Smeg CW400RSD Manuel d'utilisateur télécharger pdf (Page 9)



3 DISPLAY

Can indicate the program which will begin and the boiler/Tank

temperature.

In case of anomalies an error code will be indicated, for example

“E 1”

- Boiler temperature anomaly

- Tank temperature anomaly

- Tank loading anomaly

- Tank draining anomaly

- Boiler anomaly

Start button Initiates the program shown on the display

Bicolor led indictor

This led indicates the state of the machine

• Green indicates the machine is ready for a new program

• Red indicates the machine is busy with an operation

• Yellow indicates a break after Tank draining

MACHINE CONFIGURATION PARAMETERS (Intended for technical personnel, not the user

)

Parameter Description Range Preset

P0 Drain cycle time 1-5’ 1

P1 Boiler temperature 60-95°C 82

P2 Tank temperature 40-65°C 55

P3 Rinse duration 10-40’’ 13

P4 BOILER STOP option YES/NO 1 YES

P5 Brief wash time 60-90 60

P6 Drain with overflow option YES/NO 1 YES

P7 Cold rinse option YES/NO 0 NO

P8 Regeneration option YES/NO 1 YES

P9 Maximum water load duration 1-10’ 10

P10 H2O Hardness (to be set by the user based on water hardness) 35 15

P11 Machine type 4 4

P12 Wash number counter YES 1 YES

PARAMETER FUNCTION WITH MACHINE ON

Upon first installation it is possible to perform a series of operations which allow for the personalization of the

dishwasher based on the user’s necessities, as well as a test cycle which quickly checks the functionality of all of

the components. To perform these operations it is necessary to set the machine to “programming mode” as

described hereafter

‐ Shut the machine off by pressing

‐ Simultaneously press

and until P0 appears on the display

‐ With the

button (ahead) and the button (back) select the programs

‐ Once the parameter to modify has been identified, keep the

button pressed and modify the required

setting with the “ahead”

and “back” buttons

‐ Once the setting has been correctly modified, release the

button

‐ When finished with the settings turn the machine off and on again by pressing

Note: always turn on the DRAIN PUMP function in machines with Air Tank or Break Tank even if absent.

IN PARAMETERIZATION MODE, IF NO BUTTON IS PRESSED WITHIN 30 SECONDS THE KEYBOARD SHUTS

DOWN AND RETURNS TO ITS OFF STATE.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Commentaires sur ces manuels

Pas de commentaire

Smeg CW400RSD Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Smeg CW400RSD