Smeg DF410BL Manuel d'instructions télécharger pdf (Page 13)

User instructions



FAULT DESCRIPTION

Turbine flow-regulator malfunction

(for the relevant models only)

The appliance is not able to "measure" the amount of water loaded

accurately. Interrupt the program and switch off the dishwasher. Switch

the dishwasher back on, program it again and start the washing cycle. If

the problem persists, contact the after-sales service.

Alternate washing system malfunction

Interrupt the program and switch off the dishwasher. Switch the

dishwasher back on, program it again and start the washing cycle. If the

problem persists, contact the after-sales service.

Water intake system malfunction

Contact the after-sales service.

• The

alarms provoke the “forcing” to end

cycle of the running program.

• The

alarms interrupts the running program once the cause is

resolved, it will bring bach the execution of the program.

• The alarm

is visualized at the end of the cycle that comes,

however, brought to the end since the operation of the dishwasher is

not harmed.

To “reset” an alarm is necessary:

• Open and close the door, or turn off and on the machine. At this

point is possible to program the dishwasher again.

If the fault persists, call the authorised Technical Service Centre.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Pas de commentaire

Smeg DF410BL Manuel d'instructions Page 13