Smeg DI4-1 Manuel d'instructions télécharger pdf (Page 12)

User instructions

1.2 Wash programs

Before starting a wash program check that:

• The water supply tap is open.

• The softener container contains regenerating salt.

• The correct amount of detergent has been added to

the dispenser.

• The baskets have been correctly loaded.

• The spray arms are able to rotate freely and without

obstruction.

• The dishwasher door is securely closed.

OPTION SELECTION

Press the button to the required option; the corresponding light will come

on to confirm activation.

• It is not possible to select any options when the soak

program is being used.

• All options except "Flexi Tabs" are disabled at the end of the

wash cycle. To disable the “Flexi Tabs” option, press the

button (the light will turn off).

• All options, including "Flexi Tabs" are disabled when a

program is CANCELLED after it has begun.

ADDITIONAL OPTIONS (on some models only)

These are activated by pressing two buttons simultaneously as

shown by the graphics on the control panel (e.g. “Flexi Tabs” in this

illustration)

QUICK TIME PROGRAMS

Select this option together with any washing program (except the soak

program) to SHORTEN the cycle by from a minimum of 10% to a

maximum of 55%, depending on the cycle selected. To activate this

option, press the QUICK OPTION button (light comes on) after

selecting the program required. The option is automatically deactivated

at the end of the program.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Pas de commentaire

Smeg DI4-1 Manuel d'instructions Page 12