Smeg A1AU6 Manuel d'utilisateur télécharger pdf (Page 13)

Instructions for the Installer

5.2 US installation and canadian installation / 4-wire branch circuit

Refer to picture 2,

- Disconnect the green or yellow green from the

white lead.

- The ground wire must be attached first;

- Connect the green or yellow-green ground wire

from the appliance to the ground in the junction

box (green colored wire) using UL/CSA listed

wire connectors. Do not connect the

grounding wire to the neutral wire in the

junction box.

- Connect the red and black leads from the

appliance to the corresponding leads in the

junction box using UL/CSA listed wire

connectors.

- Connect the white wire from the appliance to the

neutral white wire in the junction box using a UL/

CSA listed wire connector.

pic.2)

Connect to a 20A fuse or circuit breaker. Connect to copper wire only, or, if connecting to aluminum

house wire, use UL-listed or CSA-approved connectors, which are suitable for joining aluminum with

copper wires.

NOTE: Both power cables coming out of the range, must be connected according to the diagrams shown

in pictures 1 and 2

UL/CSA

listed wire

connector

1 2 ... 8 9 10 11 12 13 14 15

Pas de commentaire

Smeg A1AU6 Manuel d'utilisateur Page 13