Smeg UKFC40RX3 Manuel télécharger pdf (Page 8)

8

3) Dismantle the middle

hinge. Lift off the bottom

door. Mount the hinge

screws again.

1) Dismantle the top hinge. This

one is to be used later as top

hinge at the

opposite side. Lift

off the top door.

5) Dismantle the screws in

the middle of the new

hinge side. Mount

the bottom door and

screw on the middle

hinge.

8) Ajustment of the top

door: loosen the screws

in the hinge above the

door, loosen the hinge

above the door and turn

the hinge to the wanted

side. Tighten the screws.

9) Move the handle.

9. CHANGE OF HINGE SIDE

4) Remove the kick panel.

The bottom hinge is

dismounted at the 3

screws. The hinge is

turned 180° and

mounted

on the opposite side.

7)

The kick panel is mounted and the

hole plugs are mounted on the

opposite side.

6) Adjusting the bottom door: Loosen the

3 screws in the bottom hinge and push

the bottom hinge to the

required side. Tighten

the screws and mount

the kick panel.

2) On appliances with a

door closer on the upper

door, this door closer

should be removed and

remounted on the

opposite side.

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire