Smeg FA550XBI2 Guide de dépannage télécharger pdf (Page 22)

• Installing custom door panels

If you wish to install custom door panels, have the panels made

according to dimension drawings.

• Flat panels

Flat panels may be fitted in the frames (max thickness of panels:

6.35 mm). Flat panels less than 6.35 mm thick are not

recommended.

• Raised panels

A raised panel design can be created by screwing or gluing wood

panels to 6.35 mm backing or by using 16 mm stock with 6.35 mm

routed edges.

When installing the raised panels, leave 5.70 cm clearance between

the panels and the rear of the handle to allow holding it freely.

• Weight requirements for raised panel inserts

- The refrigerator door panel should not exceed 10 kg.

- Freezer door panels should not exceed 7 kg combined weight.

INSTALLING CUSTOM DOOR PANELS

Installing custom door panels

1 2 ... 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Smeg FA550XBI2 Guide de dépannage Page 22