Smeg FA550XBI2 Guide de dépannage télécharger pdf (Page 7)

Removing and repositioning the refrigerator compartment and freezer shelves

The shelves can be positioned as required. The glass shelves are strong enough to hold bottles, milk

cartons and heavy food, however, take care not to bang products on the shelves. To remove the shelves:

pull the shelf out as far as it goes, then lift and remove it.

Removing the crisper or meat drawer:

1. slide the drawer out as far as it goes;

2. with one hand underneath the drawer, lift and pull it out;

3. the drawer will come off the runners and can be pulled out further;

4. to remove it completely, the drawer must be turned: front end up, rear end down.

Removing and refitting the glass drawer lid

Lift the front of the frame about 10 cm with one hand, then lift the back of the frame and pull it out with

the other.

To replace the lid follow the inverse procedure.

Note: To remove the drawers and lids in the freezer compartment follow the same procedure as for the

refrigerator.

Meat/vegetable drawer temperature control device

• The cold air is conveyed inside the meat drawer through an

opening between the refrigerator compartment and the freezer

compartment. In this way the temperature inside the meat

drawer is kept lower than the rest of the refrigerator. The air

flow can be adjusted by means of the special slider.

• To store vegetables in the meat drawer, shift the control device

all the way to the left, to the vegetables setting. This avoids

possible damage due to the vegetables freezing.

Crisper moisture control device

• The level of humidity inside the crisper can be adjusted by moving

the slider in the desired position.

• By moving the slider to the far right, humidity will be eliminated

from the compartment. This setting is better for preserving fruits

and vegetables with skin.

• By moving the slider to the far left, humidity is maintained inside

the compartment. This setting is better for preserving leaf

vegetables.

“MULTIFLOW” is a ventilated air distribution system, which ensures a homogeneous temperature inside

the refrigerator compartment. Thanks to this system, the different types of food can be stored on any of

the shelves of the appliance. Attention should be paid not to obstruct the air distribution vents, thus

ensuring free air circulation.

“MULTIFLOW” AIR DISTRIBUTION

GUIDE TO THE INSIDE PARTS

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Pas de commentaire

Smeg FA550XBI2 Guide de dépannage Page 7