Smeg LSE 146 Manuel d'utilisateur télécharger pdf (Page 6)

SM2706

WARNING!! The washer/drier version must not be installed behind a locked door, a

sliding door or with a hinged door on the opposite wall to the washer/drier itself.

For transport reasons, the washing machine’s oscillating group

is locked in place by 4 spacers and screws. Before using the

machine, remove the spacers and locking screws. Keep the

screws and spacers for future use.

Close off the holes using the plugs supplied. The plugs can be found in

the bag containing the documents.

The machine must be installed by professionally qualiﬁ ed technicians, according to the manufacturer’s

indications. Incorrect installation may result in damage to persons and property.

The machine can be installed anywhere, provided the temperature in the place of installation is not

below 3°C and the cables and hoses at the rear of the machine are not crushed in any way.

For transport reasons, the washing machine’s oscillating group

is locked in place by 4 spacers and screws. Before using the

machine, remove the locking screws with a suitable tool.

Insert a screwdriver in the holes and lever out the 4 plastic spacers as

shown in the ﬁ gure.

INSTALLING THE MACHINE

(ACCORDING TO MODEL)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Smeg LSE 146 Manuel d'utilisateur Page 6