Smeg SUK92CMX9 Manuel de service télécharger pdf (Page 27)

Instructions for the installer

11. INSTALLATION

11.1 Installing in kitchen units

Veneers, adhesives or plastic coatings on adjacent furniture should be temperature-resistant (no less

than 90°C). If they are not sufficiently temperature-resistant, they may warp over time.

The appliance must be installed by a qualified technician and according to the regulations in force.

Depending on the type of installation, this appliance belongs to class 2, subclass 1 (Fig. A - Fig. B) or to

class 1 (Fig. C).

It may be installed next to walls, one of which must be higher than the worktop, at a minimum distance of

50 mm from the side of the appliance, as shown in figures A and C relative to the installation classes.

Any wall units must be at a minimum distance of at least 750 mm above the appliance. This distance can

be reduced to 650 mm if a ventilation hood is installed.

Built-in appliance

(Class 2 subclass 1)

Built-in appliance

(Class 2 subclass 1)

Free-standing

appliance (Class 1)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Smeg SUK92CMX9 Manuel de service Page 27