Smeg PS906 Manuel de service télécharger pdf (Page 10)

Instructions for the installer

To fix the hob solidly to the counter top use the 10 supplied brackets,

tightening their screws to lock the product firmly in position. The following

figures show how to attach these brackets to the lower casing of the

product.

This appliance can also be installed in a 90 cm base. To fit the brackets

the hob must be inserted into the opening made in the counter top, with

the edge resting on the actual top. To bracket the hob laterally, just fix the

two “L” brackets to the sides of the unit (A) using the supplied screws (1)

making sure to align the slot (B) on the bracket with the rivet (C) on the

bottom of the product. Stabilise the fixing of the hob by tightening the

screw (2) in the rivet (C).

Complete the bracketing of the front and rear part of the hob as described

in the previous point.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Pas de commentaire

Smeg PS906 Manuel de service Page 10