Smeg SI321D Manuel de service télécharger pdf (Page 20)

Instructions for the installer

8.3 Mounting

8.3.1 Over empty kitchen unit or drawers

If there are other pieces of furniture (lateral walls,

drawers, etc.) under the hob, a double-layer

wooden base must be installed at least 30 mm from

the bottom of the hob to avoid any accidental

contact. It must only be possible to remove the

double-layer base using suitable equipment.

opens on bottom opens on rear

8.3.2 Over built-in oven

If installed on top of an oven, the latter must be equipped with a cooling fan.

The distance between the induction hob and the kitchen furniture or other built in appliances must be

enough to ensure sufficient ventilation and air discharge.

Remove the front transverse strip (if necessary) on the unit to create an opening for the air flow of at

least 4 mm under the work surface across the full width of the appliance.

In any event, if installed above an oven, a dishwasher or a fridge, a space of at least 5 cm must be left

between the hob and the top of the appliance installed below.

opens only on bottom opens on bottom and on rear

1 2 ... 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Smeg SI321D Manuel de service Page 20