Smeg TRU90BL Manuel d'instructions télécharger pdf (Page 14)

Installation

16

U.S. Installation only / 3-wire branch

circuit

Refer to figure, where local codes allow the

connection of the ground wire from the

oven to the power supply cable neutral

wire (white wire):

• The ground wire must be connected first;

• If local codes permit, connect the green

or yellow-green ground wire from the

range and the white wire from the range

to the power supply neutral wire (white

wire).

• Connect the red and black leads from

the range to the matching color wires in

the junction box using UL/CSA listed

wire connectors.

U.S. and Canada installation / 4-wire

branch circuit

• Separate the green or yellow-green

wires from the white wires that extend out

of the end of the appliance cable.

• The ground wire must be connected first.

• Connect the green or yellow-green

ground wire from the appliance to the

ground wire in the junction box (green

colored wire) using UL/CSA listed wire

connectors. Do not connect the

grounding wire to the neutral wire in the

junction box.

• Connect the red and black leads from

the appliance to the matching color

wires in the junction box using UL/CSA

listed wire connectors.

• Connect the white wire from the

appliance to the neutral white wire in the

junction box using a UL/CSA listed wire

connector.

A cable from power supply bw black wires

B junction box gw white-green or yellow-green wires

C cable from range rw red wires

D UL/CSA listed conduit connector ww white wires

1 2 ... 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire