Smeg TRU90BL Manuel d'instructions télécharger pdf (Page 7)

Installation

9

EN

1.2 Product dimensions

Overall dimensions: location of gas and

electrical connection points.

Check the location where the range is to be

installed. The range should be positioned

for convenient access in the kitchen.

The cabinet opening dimensions that are

shown must be used. The indicated

dimensions are the minimum clearances.

When installing a range under existing

cabinets that do not satisfy the minimum

cabinet clearances, install a rangehood

over the cooking surface to avoid burn

hazards.

An air curtain or other overhead range

hood, which operates by blowing a

downward airflow onto a range, shall not

be used in conjunction with the gas range

unless the hood and range have been

designed, tested in accordance with ANSI

Z21.1 and listed by an independent testing

laboratory for combination use. This type of

ventilation system may cause ignition and

combustion problems with the gas cooking

appliance resulting in personal injury or

unintended operation.

A 46 mm

1

13

/

16

”

B 660 mm

25

15

/

16

“

C 124 mm

4

7

/

8

”

D

41 mm

1

5

/

8

”

E

898 mm

35

3

/

8

”

F

782 mm

30

3

/

4

“

NOTE: Observe all governing

codes and ordinances.

Any openings in the wall or floor

where the range is to be installed

must be sealed.

Some cabinet and building

materials are not designed to

withstand the heat that the oven

produces during baking. Check

with your builder or cabinet

supplier to make sure that the

materials used will not discolor,

delaminate or sustain other

damage.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Commentaires sur ces manuels

Pas de commentaire