Smeg SY92PX8 Manuel de service télécharger pdf (Page 21)

Instructions for the user

9.4.2 Burner caps and flame-spreader crowns

The burner caps and flame-spreader crowns can be removed for easier

cleaning. Wash them in warm water and a non-abrasive detergent making

sure to remove any encrustation, then wait until they are perfectly dry.

Refit the flame-spreader crowns, making sure that they are correctly in

place with their respective burner caps, and ensuring that the holes A in

the flame-spreaders are aligned with the igniters and thermocouples.

Do no wash these parts in a dishwasher.

9.4.3 Igniters and thermocouples

For correct operation, the igniters and thermocouples must always be

perfectly clean. Check them frequently and clean them with a damp cloth if

necessary. Remove any dry residues with a wooden toothpick or a needle.

Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with

metallic finishes on the surface (e.g. anodizing, nickel- or chromium-plating).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Pas de commentaire

Smeg SY92PX8 Manuel de service Page 21