Smeg A31X-6 Manuel d'utilisateur télécharger pdf (Page 19)

Instructions for the User

Starting cooking: as well as setting a cooking duration, the cooking start

time can also be set (with a maximum delay of 12 hours from the current

time). To set the cooking start/end time, proceed as follows:

- Set the cooking duration as described in the previous point.

- Within 6/7 seconds of the last pressure on the

or keys, press

the

key again to set the cooking start time. The current time will

appear on the display with internal segments illuminated to show the

end of cooking time. Use the

and keys to set the cooking

start time.

- 6/7 seconds after the last key is pressed, the display will show the

current time and the cooking start and end times, which will be

represented by the illuminated inside segments. The display

segments will be constantly illuminated as long as the current time is

not the same as the cooking start time; as soon as the current time

reaches the set starting time, all the inside segments will start to

flash, indicating that the oven has started cooking.

- At the end of the cooking time the timer will switch the oven heating

elements off, the beeps will start to sound and the numbers on the

dial will flash.

- To reset the whole program set, keep the central key

pressed for

1 or 2 seconds: if cooking has already started, the oven will have to

be switched off by hand.

- Here we can see a programming example: the

current time is 7:06 and cooking is programmed to

start at 8:00 and end at 9:00.

- At 8 o'clock the inside segments between 8 and 9

will start to flash, while the hours hand will remain

still.

Caution: for the oven to start cooking operations after the

programming procedures just described, the thermostat and

function selector knob must correctly set on the temperature and

function required.

5.2.4 "DEMO" Function

Models with analogue/digital programmer feature a "DEMO" function

which deactivates the heating elements while leaving the other functions

unchanged. To activate it, simply press the

, , and keys for 3/4

seconds. A confirmation beep will inform the user that the function is

active. To deactivate it, simply repeat the same procedure.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Smeg A31X-6 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Four Smeg A31X-6