Smeg SC321N Manuel d'utilisateur télécharger pdf (Page 17)

Instructions for the user

12.4 Removing the glass panels

The glass in the door should always be kept thoroughly clean. For easier

cleaning, the door glazing can be fully removed by proceeding as

described below. After opening the door and locking it in place as

described in point “12.2 Removing the door”, remove the internal glass

pane levering it as illustrated in figure 1, and detach the 4 pins that fix the

glass to the door. If your oven also has a middle glass pane (figure 2) this

can be extracted simply by lifting it upwards. After having carried out the

cleaning, first of all replace the middle glass panel (if your oven has one),

and then position the internal glass hinging it, as shown in figure 3, on the

grooves of the oven door (see part A in figure 3). When the glazing has

been positioned on the door, exert a slight pressure on the four fixing pins.

If the door should close during these operations, simply relock one of the

hinges as described in point “12.2 Removing the door”. The panes of

glass can now be washed separately.

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Smeg SC321N Manuel d'utilisateur Page 17