Smeg SCP160XU Manuel d'utilisateur télécharger pdf (Page 6)

Instructions for the Installer

US INSTALLATION ONLY – 3 WIRE BRANCH CIRCUIT

Refer to figure 1, where local codes allow the

connection of the ground wire from the applliance

to the branch circuit neutral wire (white wire):

- The ground wire must be connected first;

- If local codes permit, connect the green or

yellow-green ground wire from the appliance

and the white wire from the appliance to the

branch circuit neutral wire (white wire).

- Connect the red and black leads from the oven

to the corresponding leads in the junction box.

fig.1)

US INSTALLATION AND CANADIAN INSTALLATION – 4 WIRE BRANCH CIRCUIT

Refer to figure 2,

- Disconnect the green or yellow-green from the

white lead.

- The ground wire must be connected first;

- Connect the green or yellow-green ground wire

from the appliance to the ground in the junction

box (green colored wire). Do not connect the

grounding wire to the neutral wire in the

junction box.

- Connect the red and black leads from the

appliance to the corresponding leads in the

junction box.

- Connect the white wire from the appliance to the

neutral (white) wire in the junction box.

fig.2)

Connect to a 20A fuse or circuit breaker. Connect to copper wire only, or, if connecting to

aluminum house wire, use UL-listed or CSA-approved connectors, which are suitable for joining

aluminum with copper wires.

UL/CSA

listed wire

connector

UL/CSA

listed wire

connector

1 2 3 4 5 6

Pas de commentaire

Smeg SCP160XU Manuel d'utilisateur Page 6