Smeg FA28AP Manuel d'utilisateur télécharger pdf (Page 11)

142725

Instructions for Use

Changing the Direction of Opening the Door

If you find the direction of opening the door on

your appliance inconvenient, you can change it.

Holes on the opposite side have already been

prepared in the factory.

• Unscrew the kick-plate and remove it by

pushing downwards.

• Unscrew the lower hinge and take off the door

together with the upper hinge washer.

• Unscrew the upper hinge fastener and fix it on

the opposite side of the appliance.

• Take off, change and replace the door hinge

fixture and the fixture plugs.

• Put the door with the upper hinge washer on

the upper hinge fastener.

• Fix the lower hinge with washer on the new

position.

• Replace the cover plate of the lower hinge to

the opposite side of the kick-plate and place it

to the appliance.

• In case your appliance is equipped with a

handle mounted on the side of the appliance,

take it off and replace it on the other side.

Some screws are covered with caps. Take

them off before undoing the screws.

• Check the gasket, it shouldn't be creased and it

should seal well.

Changing the Direction of Opening

the Door on the Frezing

compartment

• Unscrew the blocking element and the hinge of

the Frezing compartment and take off the door.

• Plug the holes with plastic caps provided.

• Turn the door for 180° and replace it on the

opposite side of the Frezing compartment. Fix

the hinge and the blocking element of the door

(position of holes already provided).

1 Upper hinge fastener 5 Kick plate or control panel

2 Upper hinge washer 6 Cover plate of the lower hinge

3 Lower hinge 7 Fixture plug of the door hinge

4 Lower hinge washer 8 Door hinge fixture

9 Frezing compartment 11 Door hinge

10 Blocking element

1 2 ... 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Smeg FA28AP Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Smeg FA28AP