Smeg A2PY-6 Manuel de service télécharger pdf (Page 32)

Instructions for the User

10.2.2 The burner caps, flame diffuser rings and burners

The burner caps, flame diffuser rings and burners can be removed for

easier cleaning. Remove the pan stands and wash them in warm water

with a non-abrasive detergent, taking care to remove all deposits, and

wait until they are completely dry. Replace the flame diffuser rings,

checking that they are correctly in place with their respective burner caps,

making sure that the holes A in the flame diffusers are aligned with the

plugs and thermocouples.

10.2.3 The plugs and thermocouples

For best performance, the ignition plugs and thermocouples

must always be kept thoroughly clean. Check them

frequently and if necessary clean them with a wet cloth.

Remove any dry residues with a wooden toothpick or a

needle.

10.3 Cleaning the oven

To keep the oven in good condition, it must be cleaned regularly, after

allowing it to cool down. Remove all removable parts.

In the auxiliary oven, remove the side runners by lifting them at the front

and extracting them from the hole at the back.

• NEVER USE A JET OF STEAM FOR CLEANING THE

APPLIANCE.

• Clean the oven shelves and side runners with hot water and non-

abrasive detergents, rinse and dry.

10.3.1 Self-cleaning oven liners (auxiliary oven)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Pas de commentaire

Smeg A2PY-6 Manuel de service Page 32