Smeg SUK62MX8 Manuel de service télécharger pdf (Page 20)

Instructions for the user

9.4.2 Pan stands

Remove the pan stands and clean them with lukewarm water and non-abrasive detergent, making sure

to remove any encrustations. Dry them thoroughly and return them to the hob.

Continuous contact between the pan stands and the flame can cause modifications to the enamel over

time in those parts exposed to heat. This is a completely natural phenomenon which has no effect on the

operation of this component.

Do no wash these parts in a dishwasher.

9.4.3 Burner caps and flame-spreader crowns

The burner caps and flame-spreader crowns can be removed for easier

cleaning. Wash them in warm water and a non-abrasive detergent making

sure to remove any encrustation, then wait until they are perfectly dry.

Refit the flame-spreader crowns, making sure that they are correctly in

place with their respective burner caps, and ensuring that the holes A in

the flame-spreaders are aligned with the igniters and thermocouples.

Do no wash these parts in a dishwasher.

9.4.4 Igniters and thermocouples

For correct operation, the igniters and thermocouples must always be

perfectly clean. Check them frequently and clean them with a damp cloth if

necessary. Remove any dry residues with a wooden toothpick or a needle.

Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with

metallic finishes on the surface (e.g. anodizing, nickel- or chromium-plating).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Pas de commentaire

Smeg SUK62MX8 Manuel de service Page 20